Hello,
Some of you have asked so we decided to post pictures on how to make your own magsafe cable for the Phorce bag. We take no responsibility if you’ve wired up wrong or damaged your devices!
The part numbers are: KPPX-4P
2.15K Resistor
Let’s get started.
Assembly instructions… We had to practice a few times to get this right, so hope you find the included detailed instructions below helpful!
Positive wire goes to Pin1, Neg to Pin2. Resistor 2.15k resistor to Pins 3 and 4.
First assemble the enclosure and the Strain relief as so.
Slide on the enclosure, springs, and plastic guide in this order.
Pos to pin1, and Neg to pin2
Resistor to pins 3 and 4
Slide in the circular notch
Slide on the Arm.
Crimp wire
Put on Top metal Cover.
Slide on the Spring.
Snap on the plastic enclosure, notice notch side up.
Snap on Plastic Coupling.
☎️ For more information and inquiries:
🌐 Website: https://mikegyver.com
📕 Blog: https://mikegyver.com/blog
✉️ Email: [email protected]
2 Comments